For High-Speed ​​Booting What Need To Pay Attention

- What should you pay attention to in order for the starter to have high durability?
Latest update date: February 08, 07

Starting motor is simply understood as the system that drives the crankshaft to a certain speed, helping the engine start automatically. Therefore, the engine starts to play a very important role in cars. Just a small problem with the starter will directly affect your car. 

Principle of operation of the starter
Principle of operation of the starter

So, do you know how to extend the durability of the boot machine? If you do not know it thoroughly, then let's do it Thanh Phong Auto Check out some tips to increase the durability of this system in the following article!

Things to Note For High-Speed ​​Starting Machine

Principle of operation of the starter 

  • Suck in

The current from the battery will move into the holding coil and suction coil when you turn on the ignition to START. The current then flows in the current from the coil through the armature to the coil and finally cool. The purpose of generating the electromagnetic force in the holding and suction coils is to magnetize the polar core, which leads to the piston of the magnetic switch being sucked into the polar core of the electromagnet. Thanks to this suction, the gears matched the gear of the flywheel. Along with that is the contact disc that will turn on and off.

  • Hold

There will be no current flowing through the suction coil whenever the main switch is turned on. Because at this time the two ends of the suction coil are inductors, reactors and isotopes receiving direct current from the two battery ends. The engine will be started by the rotating coil at high speed. At this time, the piston is held in place by the electromagnetic force of the coil because current does not flow through the suction coil.

- What should you pay attention to in order for the starter to have high durability?

  • Back

When the electromagnetic lock is turned from START to ON, the main contact is still closed. The current then flows its current from the main switch to the suction coil and then through the holding coil. Suction and hold coils have the same structure in terms of number of turns and winding in the same direction. At this time, the current flowing through the suction coil is reversed. This makes the piston unable to hold because the electromagnetic force generated by the suction coil eliminates back and forth. Therefore, the piston was pushed back to the spring. The main switch is disconnected and the machine starts to stop.

Note: Effectively Solving Glass Wash Water System On Oto

Tips to help the boot durable

  • Clean the boot machine in the proper way

- What should you pay attention to in order for the starter to have high durability?

Over time of use and different usage methods may lead to battery corrosion. Internal acid batteries generate hydrogen and other substances that cause corrosion. When the electrodes are completely eroded, the current is no longer transmitted from the battery to the starter. Therefore, the electrodes must be cleaned regularly to maintain current.

  • Clean the wire

- What should you pay attention to in order for the starter to have high durability?

The conductor connects the battery from the battery to the starter. It will be affected by the dirt on the wire. 

Should clean the wires periodically to avoid electrical congestion leading to starting the car more smoothly.

  • Tighten the bolt

If the bolt is loose, the flywheel and starter will not be connected. So how to know if the bolt is loose? When you hear a creaking sound when starting the car, the bolt is loose now.


  • Check the flywheel

- What should you pay attention to in order for the starter to have high durability?

Gears are connected to flywheels to spin the engine. The teeth of the gear and flywheel must fit together for smooth operation. 

Once damaged flywheel is detected, it must be replaced immediately. Do not attempt to use the flywheel when a failure is detected. If you do not want your booting machine to be destroyed quickly.

Above Auto Thanh Phong I have told you a few tips to prolong the use of the car starter so that you can "pocket" when using. Not only with cars, but also with any other item. You all need to have a certain understanding to take care of and warranty to use it for a long time.

Thanh Phong Auto is a reputable and quality repair, warranty and replacement unit. With a team of technicians with experience and enthusiasm for the profession. If you have a need to take care of your beloved car, please contact Auto Thanh Phong. We will give you a service that exceeds your expectations.

See More Great Articles At Sharing translation experiences Of Thanh Phong:

Instructions for Checking Gasoline Pump For Cars

Water Pump In The Car When It Need To Replace

Importance Of Car Surface Coating Calibration Process

Rate this post


Your email will not be displayed publicly. Required fields are marked *

Cars Care Service Price Sheet At Thanh Phong Auto HCMC VietNam:

* The cars that we have mechanics: Mercedes, BMW, Audi, Lexus, Toyota, Honda, Mazda, Mitsubishi, Kia, Daewoo, Hyundai,Ford, Nissan, Volkswagen, Porsche, Chevrolet, Rand Rover, Innova, Fortuner, Vios, Fiat, Bugatti, Ferrari, Bentley, Hummer , Chrysler, Dodge, Renault, Cadillac, Volvo, Subaru, Daihatsu, Ssangyong, Roll-Royce, Peugeot, Smart Fortwo, Tobe M'car, Luxgen, Zotye, Haima, Geely, Baic, Hongqi, Cmc, Mini Cooper, Buick, Opel, Acura, Aston Martin, Vinfast, TQ Wuling, BYD.


To keep your vehicle running properly at all times, we offer a number of services that are carried out by our certified, expert auto service and repair technicians who have years of experience performing everything from oil changes to a complete engine overhaul.