6 Notes When Repairing, Upgrading Car Door Handles

The car door handle is a small part but plays a quite important role in the overall vehicle. Replacing car door handles is also quite simple, you just need to understand a little about cars to do it. However, there will still be some cases where after installing the door handle, it does not function properly or does not function stably.

In today's article, we want to share with you Note when repairing and upgrading car door handles. If you are also interested in this issue, don't miss our article.

6 Notes When Repairing, Upgrading Car Door Handles

Typically, the door handle parts of cars will encounter a few problems after using time. At this time, the operation to open and close the car door will become more difficult than before. If you're too busy at work and don't have time to fix that door handle. What you need to do to fix that situation is to take it to a car repair center for assistance.

>>> Suggestions: Popular types of car doors today

However, if you are someone who likes to take care of his car. Replacing door handles can be done by your own hands.

Step 1: Find a suitable replacement door handle

Not every type of door handle can fit your car. There are many different types of door handles designed specifically for a certain type of car. So the first thing you need to do is to choose the right door handle for your car. You can easily find a door handle that is suitable for your vehicle at genuine accessories and repair shops.

Normally, car doors for each car line will be designed with different locking systems. Therefore, you need to be aware of the information related to removing, installing screws, handles. By this operation, you can know that the door handle in your car should be removed from the outside or from the inside, or removed by any method.

Step 2: Remove the interior door sill

Before removing the interior door sill, you need to know where the screws are located on the inside of the side panel. Spread a smooth, white towel to place the screws you just removed.

Once you have removed the protective guards, you should use tape to mark their positions. When removing the car door cover, you need to pay attention to your operation, the more careful, gentle the better. How good is the plastic cladding, it will also be brittle after a period of use. Failure to do so may result in cracked or cracked cladding.

One tip for you is to take a picture of your car's window before taking it apart. When installing again just look at the picture. Avoid forgetting the location after disassemble.

+ Note: 5 Note When Maintaining Toughened Car Tires With Time

Step 3: Remove the locking mechanism of the door handle

Once you have removed the interior door sill, you will see the other parts attached to the door handle. You need to pay attention to remove all the parts related to the door handle with the most careful operation. You can memorize it yourself or mark it all up to avoid any confusion when reinstalling.          

After you have removed the door panels in the car, you will see the other parts are attached to the door handle. Remove all parts related to the door handle carefully, remembering and marking all of them again to avoid accidental installation.

Step 4: Replace the new handle

This is a step that you need to take very carefully, because if you just installed a wrong screw, it can make the function of the door lock not working as expected.

The first thing you need to do is clean the inside, including the edges of the handle frame. Next, you need to anticipate first to see if the lock fits or not, then proceed to install the other parts. If you forget the position of the parts, you can open the previous image to view.

Step 5: Check that the door is not working properly

Before you proceed to install the door handle, you need to ensure that all parts are still operating in a normal, stable manner. You should check carefully to see if there are any errors or where the screw is not tight or not. Try opening and closing a few times to make sure the door is working properly and stably.

+ Note: Fix Air Conditioner Running Without Cooling In Cars

Step 6: Reassemble door panels

After you have installed the door handle, you need to install the panel back to its original position.

You can find out more information to ensure the process of fitting the door handle most smoothly.

You are viewing the article 6 Notes When Repairing, Upgrading Car Door Handles in the category General Blog of Thanh Phong Auto. All reviews for the service you can leave a comment below the article. Don't forget to check out other great articles and share them with everyone!