Vibration when moving is a common phenomenon in cars that have been used for a while. Although this phenomenon is not dangerous but it makes people sitting in cars feel uncomfortable.
Especially for those who are motion sick, this phenomenon is an obsession. To find out what causes that phenomenon, let's go together Thanh Phong Auto Refer to the article below.
It is very difficult to pinpoint immediately the exact cause. Because car engines are made up of thousands of different machine parts. However, the technician can make some predictions of the following underlying causes:
Over time using car tires will wear unevenly, there will be shallow and deep wear points. The vibration will be generated mainly by deep wear points.
If the deep worn point is in the middle of the tire, the car will bounce up. But the deep worn point on the side leads to dynamic imbalance that makes the tires sway back and forth as the vehicle runs.
Technicians can easily ameliorate this by attaching different weights of lead to the appropriate corrosion points. A modern suspension system like today will help the driver feel good about the road surface, but at the same time it also makes it easier for vibrations to be transmitted into the car.
When the car runs at 50km / h you begin to feel the dynamic imbalance and when running up to 80km / h is the most obvious feeling. If the vibration is felt from the front of the steering wheel, it is necessary to balance the front tires, and if the vibration from the rear seat is balanced the rear tires.
> Recommended: Signs you should change your car tires to ensure safety
If the rim is hit and the car appears to shake, then the rim has been sold. At this time, the wheel no longer rotates in its orbit leading to dynamic imbalance.
Technicians can use the gauge to check the semi-axle radius of the rim. The allowable parameter is no more than 1 / 32inch deviation. If the rim is steel, the technician can make it straight, but if it is aluminum, you have to replace it.
When the brake pedal is vibrated, the drum and the disc are bent, buckled, or unevenly worn. Or maybe the brake drum and disc get dusty too much for a long time without cleaning.
This phenomenon is most evident when the car moves at high speed leading to the rotating parts that she unevenly impacted from the brake pads causing great impact. To solve the problem of dust drum and dust disc, technicians must remove the brake drum and brake disc to produce, clean, straighten if warping.
If the cause is uneven wear of the brake drum and disc, the technician will use a lathe to remove the outer layer to give a flatter and smoother surface. This helps to avoid vibrations and helps the brakes work better. However, this method reduces the shelf life of the brake drum and disc, so if it is not necessary, it should not be done.
> Recommended: The common damage of the brakes
Clusters of components in the powertrain after continuous use will be damaged or abraded. It is also one of the causes of vibration for cars.
When the wheel rotates, the shaft - plate rotates 3 - 4 times the speed of rotation of the wheel. Therefore, if the shaft is worn out or the cross-joint is loose, the vehicle will shake and make unpleasant noise. If the shaft is loose, it must be replaced.
> Recommended references: Learn about car steering systems
Everyone must understand that a car engine is made up of thousands of parts that work together. Although every detail is designed and assembled optimally, when operating, it still causes certain vibrations.
To hide the vibrations, the manufacturer usually places the engine on the rubber caps (forks). However, after using the forks will gradually reduce the elasticity and vibration phenomenon appear clearly.
Shaking can also occur when a cylinder does not explode. At this point, the technician can draw out each high voltage line from the spark plug on the machine to check.
> Recommended references: Causes of reduced car engine power
If it is withdrawn but the engine does not stop shaking, then the machine does not work and vice versa. Then depending on the cause we have a solution.
Above, Thanh Phong Auto has mentioned a few What causes vibrations in cars bowl for you to grasp. If your car is also experiencing this phenomenon, come to Thanh Phong Auto's maintenance and repair service. Thanh Phong Auto will definitely bring you the most satisfaction and satisfaction.
Cars Care Service Price Sheet At Thanh Phong Auto HCMC VietNam:
* The cars that we have mechanics: Mercedes, BMW, Audi, Lexus, Toyota, Honda, Mazda, Mitsubishi, Kia, Daewoo, Hyundai,Ford, Nissan, Volkswagen, Porsche, Chevrolet, Rand Rover, Innova, Fortuner, Vios, Fiat, Bugatti, Ferrari, Bentley, Hummer , Chrysler, Dodge, Renault, Cadillac, Volvo, Subaru, Daihatsu, Ssangyong, Roll-Royce, Peugeot, Smart Fortwo, Tobe M'car, Luxgen, Zotye, Haima, Geely, Baic, Hongqi, Cmc, Mini Cooper, Buick, Opel, Acura, Aston Martin, Vinfast, TQ Wuling.
To keep your vehicle running properly at all times, we offer a number of services that are carried out by our certified, expert auto service and repair technicians who have years of experience performing everything from oil changes to a complete engine overhaul.
LEAVE COMMENT