The license plate is one of the small but important parts of the overall vehicle. However, because the license plate is installed outside, it is easy to be exposed to the environment such as dirt, weather, steam, etc. Some problems due to collision when moving the car also cause the license plate to be deformed. According to legal regulations, if the license plate is broken or old, it must be renewed. Many car owners worry about cumbersome procedures, so they often choose to upgrade their license plates.
We will share to you Note when fixing the license plate of cars - pressing, recovering and renewing the license plate. If you are also interested in this issue, do not rush to skip our article below.
Services of making new number plates, pressing license plates for cars have been appearing for many years. Almost every customer after choosing the license plate service is also very satisfied with the quality of the product.
Many people also describe that "a beautiful car and how good if carrying the old license plate is like when you wear a nice, luxurious clothes but use an old business card to introduce yourself."
Although at a glance we feel the process of renewing the license plate is nothing too complicated. However, if you are not a professional with many years of experience, the license plate quality will not be as expected.
To renew the license plate of old, degraded and distorted cars, you will need to perform the following steps:
With the old license plates and appear many scratches, dented, fuzzy digits, peeling paint. The first thing the repairer needs to do is separate the license plate from the back plate. Next is to conduct a clean cleaning of the old glue in the border, remove the surrounding stains. When the cleaning job is finished, you proceed to repaint the number on the plate with peeling paint.
Next, you will paste reflective coating and then apply a layer of transparent glue on the entire surface of the license plate.
When the blurriness and scratches have been restored. The mechanic will carry out pressing the number plate to bring a long life to the product and ensure aesthetics.
Typically, the quality of the sign will be determined by several factors such as:
+ Skilled workers, skilled and skillful people will bring the best number plates.
+ The quality of the pressed mica panels is good, durable, the life of the new license plate is long.
+ The quality of the stainless steel back plate.
Typically, to the durability of the license plate of cars is increased, the mechanic will use a piece of stainless steel rectangular. This detail will be placed between the number plate and the stainless steel plate.
This is also a way to help the screws attach more firmly, increasing the ability of waterproofing backward into the water.
At the same time, to make sure there will be no water absorbed, people also choose the method of pouring glue on the screw fastening points. Glue pouring work also needs to ensure proper technique, the amount of glue should be used just enough. Because if you use too much glue it will spill out and stick to the sea. However, if the worker spills too little glue, the screw position will still have gaps. This also means that it is impossible to completely prevent water from getting inside.
The next step the worker will do is place the license plate inside the case. Then put a piece of mica on the surface of the number plate. The mechanic will choose a mica with the best quality to limit the yellowing, dullness after a period of use.
The next thing the worker needs to do is pour the glue onto the edge of the mica and the cladding. Use the hammer to mound the corners, squeezing the mica into the board.
All the extra work, pressing the number plate always requires meticulousness. At the same time, the downforce is not too strong, not too light. The impact force is too strong that the number plate can easily scratch the bezel or deform, but if the force is too light, the panel will not be able to hold the plate tightly.
If you want to make sure the license plate is pressed tightly and ensure good durability. Workers will need to use a dedicated support device that is the number plate press. The device helps to shorten the time and increase the aesthetic value of the number plate.
Hopefully the information that we provide will help you better understand the number plate repair of the car - mound, restoration, and renewal of the license plate. Thank you for taking the time to follow the article.
You are viewing the article Note When Repairing Car Number Plate: Go Mop, Restoration, Refresh License Plate in the category General Blog of Thanh Phong Auto. Any comments to the service you can leave a comment right below the article. Be sure to check out other great posts and share them with everyone!
Cars Care Service Price Sheet At Thanh Phong Auto HCMC VietNam:
* The cars that we have mechanics: Mercedes, BMW, Audi, Lexus, Toyota, Honda, Mazda, Mitsubishi, Kia, Daewoo, Hyundai,Ford, Nissan, Volkswagen, Porsche, Chevrolet, Rand Rover, Innova, Fortuner, Vios, Fiat, Bugatti, Ferrari, Bentley, Hummer , Chrysler, Dodge, Renault, Cadillac, Volvo, Subaru, Daihatsu, Ssangyong, Roll-Royce, Peugeot, Smart Fortwo, Tobe M'car, Luxgen, Zotye, Haima, Geely, Baic, Hongqi, Cmc, Mini Cooper, Buick, Opel, Acura, Aston Martin, Vinfast, TQ Wuling.
To keep your vehicle running properly at all times, we offer a number of services that are carried out by our certified, expert auto service and repair technicians who have years of experience performing everything from oil changes to a complete engine overhaul.